Full build video1 / 6From the original build video: castle sections printing, assembled into towers, spray-painted and finished outdoors. Paint, cardboard and foam extras, display stand and scenery are not included.
Fantasy architecture
Dracula's Castle Mega Kit
The towering castle build and a 150 mm miniature, together in one kit.
The assembled miniature measures 99.59 × 77.64 × 150.00 mm. Print the two halves on their flat mating faces, then fit the two keys and glue the seam.
Knarb Makes confirmed a successful miniature print using the supplied Super Racer reference setup: PLA and a 0.4 mm nozzle. Selected organic supports are still needed. Review the editable 3MF projects for your printer; handle fine spires carefully.
The successful new print is the split miniature. The unsplit miniature is a separate alternative and needs its own support setup.
The large kit has a 20-piece recoverable assembly path before additional bed-specific cuts. The filmed build likely used 21 pieces; its wing 4 A/B split was not recovered, so the whole wing 4 is included for you to divide.
The large version is the original advanced assembly. Joint tolerances are unchanged; dry-fitting, support removal, sanding and filling may be needed. Some original source meshes have small defects: inspect your slicer’s repair result.
Full models, major sections and recovered cuts are alternatives, not extra pieces to print together. Old 3MF printer settings are references only. No machine-specific G-code is included.
Digital files only · Personal-use license · Taxes calculated at checkout
About this kit
Build a towering centrepiece or a 150 mm castle for your shelf. The miniature prints as two flat-backed halves with two alignment keys, ready to glue and paint. Both sizes are included, with assembly guides and the miniature’s reduced-support slicer projects.
